072: HS-050-HV (Shipment 15th of August 2026) If the difference in current

If the difference in current is larger than +/- 15%

Recommended maximum AUW of UAV = 50kg

so please purchase the correct cable to match your FC:

Input 4-14S LiPo / max

if you need a different output voltage on output 2  -> Output 1 can't be changed and must remain 5

072: HS-050-HV (Shipment 15th of August 2026) If the difference in current50A Current measurement sensor board, based on Allegro Hall Sensor ACS 50U. The voltage reading of the LiPo is optimized for up to 14S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section. The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry etc. Connected to the sensor are 2x10cm AWG12 wire (red) as a standard. The board