1/24 Scale Arm Tool This Comm Tool works for

This Comm Tool works for both T-Jet and AW Armatures

Each disk can be mounted on the cutting tools by removing the paper covering the double sided tape beneath

Differences Between the New and the old Balancer Includes the Enabler Tool

the switch at the rear of this dynamometer provides the option to switch between reading the incoming voltage or the speed of the car

Second the screw adjustment on the SRM Tool may be too high

1/24 Scale Arm Tool This Comm Tool works forThis ARM Tool is designed to read the resistance of all 1 24 & 1 32nd scale type Armatures one stack at a time. Turn on meter and place the armature to be tested in place, between the two measuring posts. Turn the slot in the commutator facing up. Rotate the metal stack and gently press down to make contact until the meter reading is steady. Record the reading & subtract the tolerance posted on the rear of the meter. All 3 readings can be done in less