Silicone Hose, 4.00" I.D. 135 degree Elbow, 4" Legs Color:Red These 45 degree reducer elbow

These 45 degree reducer elbow hoses have a 38mm ID at one end and a 25mm ID at the other end to connect a 1 1/2" OD tube to a 1" OD tube

These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1

The 4-ply reinforcement results in a 5mm wall thickness (93mm / 3 5/8" and 67mm / 2 5/8" OD) and a working pressure rating over 20 psi (100 psi burst pressure)

Use our Hose Joiners (HJ63) and our Lined Hose Clamps (Part No

These 135 degree elbows have a 1 1/2" ID with a smooth

Silicone Hose, 4.00" I.D. 135 degree Elbow, 4" Legs Color:Red These 45 degree reducer elbowOur silicone hose is built for endurance and performance in custom coolant and turbo intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 135 degree elbows have a 4" ID with a smooth, shiny "wipe down" finish. The legs measure at least 4 inches long (measured from